Welcome to Furniture Refresh project #2. (Check out my last post if you need a reminder what the Furniture Refresh group is all about.)
This month’s theme is “weathered” and I’m gonna be honest, it’s just not my thing. I’m more of a modern, clean edges kind of gal and that’s usually the style that inspires me when I’m working on a piece.
I was racking my brain trying to think of something to share and remembered a client/shop owner recently asked me to try the Old Fashioned Milk Paint she carries in her store. She provided an old wooden chair and a bag of yellow paint. Her only request was that I create a weathered or distressed finish. Perfect, right? I wish every problem was so easily solved.
Here’s the chair before. It was in good shape but she wanted it to be more bright and playful.
The first step with any furniture I work on is to clean, clean, clean it. I use a 50/50 mix of denatured alcohol and water. I apply it with a spray bottle and then “scrub” the piece with a green Scotch-Brite Pad. (A trick from the folks over at General Finishes.) Next comes a light sanding – nothing crazy, just enough to rough up the surface for paint.
With my prep work done I mixed up a small batch of paint and got to work. The first coat was so scary! I had never used powdered milk paint before and it seemed so thin and runny and . . . . non-paint-like. But I pushed on and after a few coats it all came together.
Finally, it was time for the fun part: Sanding!
For me the key to distressing furniture is to sand in the places that would naturally age or wear over time. For example, the top of the chair where hands grab over and over again to pull it away from a desk.
Or along the edges and corners where book bags might brush against it day after day.
I should mention too that the Old Fashioned Milk Paint I used is designed to chip and peel so it did a lot of the work for me.
Last, and most important when using a weathered finish, is to seal the project with a clear top coat. Otherwise the paint will continue to chip and peel. There are lots of options out there but my client asked me to use the Safecoat AcriGlaze she carries in her store. I put on three coats and called it DONE.
If you’re a fan of weathered finishes make sure to visit these other “Refreshers” for more ideas and inspiration. Enjoy!